solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv 592d vishay sprague document number: 40004 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 20-nov-08 89 features ? new robust 6.3 v ratings for battery operated wireless applications ? 1.0 mm to 2.5 mm height ? terminations: lead (pb)-free (2) standard ? low impedance ? 8 mm, 12 mm tape and reel packaging available per eia-481-1 and reeling per iec 286-3 7" [178 mm] standard 13" [330 mm] available ? case code compatible with eia 535baac and cecc 30801 molded chips performance characteristics operating temperature: - 55 c to + 85 c (to + 125 c with voltage derating) note: refer to doc. 40088 capacitance range: 1.0 f to 2200 f capacitance tolerance: 10 %, 20 % standard voltage rating: 4 wvdc to 50 wvdc * pb containing terminations are not rohs compliant, exemptions may apply ordering information 592d 106 x0 010 b 2 t 15h type capacitance capacitance to l e r a n c e dc voltage rating at + 85 c case code termination reel size and packaging suffix this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. x0 = 20 % x9 = 10 % this is expressed in volts. to complete the three-digit block, zeros precede the voltage rating. a decimal point is indicated by an ?r? (6r3 = 6.3 v). see ratings and case codes table 2 = 100 % tin 4 = gold plated 8 = solder plated 60/40 special order t = tape and reel 7" [178 mm] reel w = 13" [330 mm] reel maximum height (mm) see dimensions note: preferred tolerance and reel sizes are in bold. we reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. voltage substitutions will be marked with the higher voltage rating.
592d vishay sprague solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40004 90 revision: 20-nov-08 note: the anode termination (d less b) will be a minimum of 0.012" [0.3 mm] note: contact factory for availability dimensions in inches [millimeters] case code suffix h l (max.) w a b d (ref.) j (max.) a 12h 0.047 [1.2] max. 0.146 [3.7] 0.072 0.012 [1.8 0.3] 0.031 0.012 [0.80 0.3] 0.087 0.016 [2.2 0.4] 0.115 [2.9] 0.004 [0.1] a 15h 0.047 0.012 [1.2 0.3] b 15h 0.047 0.012 [1.2 0.3] 0.158 [4.0] 0.110 0.012 [2.8 0.3] 0.031 0.012 [0.80 0.3] 0.097 0.016 [2.5 0.4] 0.139 [3.5] 0.004 [0.1] b 20h 0.079 [2.0] max. b 13h 0.057 [1.3] max. c 14h 0.055 [1.4] max. 0.281 [7.1] 0.126 0.012 [3.2 0.3] 0.051 0.012 [1.3 0.3] 0.180 0.024 [4.4 0.6] 0.238 [6.0] 0.004 [0.1] c 15h 0.047 0.012 [1.2 0.3] c 16h 0.063 [1.6] max. c 20h 0.079 [2.0] max. d 15h 0.047 0.012 [1.2 0.3] 0.298 [7.5] 0.170 0.012 [4.3 0.3] 0.051 0.012 [1.3 0.3] 0.180 0.024 [4.6 0.6] 0.254 [6.4] 0.004 [0.1] d 18h 0.071 [1.8] max. d 20h 0.079 [2.0] max. r 15h 0.047 0.012 [1.2 0.3] 0.285 [7.2] 0.235 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] 0.051 0.012 [1.3 0.3] 0.180 0.024 [4.6 0.6] 0.246 [6.2] 0.004 [0.1] r 20h 0.079 [2.0] max. s 12h 0.047 [1.2] max. 0.126 0.012 [3.2 0.3] 0.063 0.012 [1.6 0.3] 0.031 0.012 [0.8 0.3] 0.079 0.012 [2.0 0.3] 0.087 [2.2] 0.004 [0.1] s 13h 0.047 0.012 [1.2 0.3] x 16h 0.063 [1.6] max. 0.575 [14.5] 0.290 + 0.010/- 0.020 [7.37 + 0.25/- 0.5] 0.051 0.016 [1.3 0.4] 0.470 0.024 [11.9 0.6] 0.524 [13.2] 0.004 [0.1] x 18h 0.071 [1.8] max. x 20h 0.079 [2.0] max. x 21h 0.083 [2.1] max. x 25h 0.098 [2.5] max. l a b d max. ref. w h j max. j max. tantalum wire nib identifies anode (+) terminal ratings and case codes f 4 v 6.3 v 10 v 16 v 20 v 25 v 35 v 50 v 1.0 a/b 1.5 b 2.2 a/b b*/c 3.3 b/c c/d 4.7 a/b c b/c/d/r 6.8 a a/b b/c c/d d/r r 10 a b b/c b/d b/d/r r 15 b b/d c/r c*/r 22 a/b a/c b/c/d b/c*/d/r c*/d* 33 b b/c/s b*/c/d b/c/d/r d*/r 47 b*/c c/d b/d/r b/c/r 68 b/c/d c/d/b/r b/c/c*/d/r/ c/d r 100 a/b/c/d/r d/r d/c c/d 120 c 150 b/c/d/r d/c d* d 220 c/d/r c/d/r d r 330 c/d/r c/d/r d 470 b/c/d/r c/d/r 680 d/r r 1000 r r/x 1500 x r/x 2200 x x
document number: 40004 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 20-nov-08 91 592d solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv vishay sprague note: * preliminary values contact factory fo r availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?. standard/extended ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 4 wvdc at + 85 c, surge = 5.2 v . . . 2.7 wvdc at + 125 c, surge = 3.4 v 22 a 592d226x_004a2_15h 0.9 6 2.40 0.16 22 b 592d226x_004b2_15h 0.9 6 1.60 0.22 33 b 592d336x_004b2_15h 1.3 6 1.60 0.22 47* b* 592d476x_004b2_15h* 1.9* 6* 1.5* 0.23* 47 c 592d476x_004c2_15h 1.9 6 0.40 0.50 68 b 592d686x_004b2_15h 2.7 6 1.40 0.24 68 c 592d686x_004c2_15h 2.7 6 0.35 0.53 68 d 592d686x_004d2_15h 2.7 6 0.27 0.68 100 a 592d107x_004a2_12h 4.0 24 1.00 0.24 100* a* 592d107x_004a2_15h* 4.0* 8* 0.80* 0.27* 100 b 592d107x_004b2_20h 4.0 8 0.20 0.87 100 c 592d107x_004c2_15h 4.0 8 0.45 0.42 100 d 592d107x_004d2_15h 4.0 8 0.35 0.53 100 r 592d107x_004r2_15h 4.0 8 0.26 0.69 100 b 592d107x_004b2_20h 4.0 8 0.45 0.42 150 b 592d157x_004b2_20h 6.0 8 0.20 0.87 150 c 592d157x_004c2_15h 6.0 8 0.45 0.42 150 d 592d157x_004d2_15h 6.0 8 0.36 0.52 150 r 592d157x_004r2_15h 6.0 8 0.25 0.71 150 b 592d157x_004b2_20h 6.0 8 0.45 0.42 220 c 592d227x_004c2_20h 8.3 8 0.20 0.87 220 d 592d227x_004d2_20h 8.3 8 0.20 0.78 220 r 592d227x_004r2_15h 8.3 8 0.19 0.76 330 c 592d337x_004c2_15h 13.2 8 0.12 1.08 330 d 592d337x_004d2_20h 13.2 8 0.12 1.12 330 d 592d337x_004d2_15h 13.2 8 0.18 0.91 330 r 592d337x_004r2_15h 13.2 8 0.15 0.86 470 b 592d477x_004b2_20h 18.8 35 0.50 0.40 470 d 592d477x_004d2_15h 18.8 8 0.14 0.94 470 d 592d477x_004d2_14h 18.8 8 0.14 0.95 470 c 592d477x_004c2_20h 18.8 8 0.10 1.05 470 d 592d477x_004d2_20h 18.8 8 0.10 1.18 470 r 592d477x_004r2_20h 18.8 10 0.10 1.32 680 d 592d687x_004d2_20h 27.2 12 0.10 1.32 680 r 592d687x_004r2_20h 27.2 12 0.10 1.18 1000 r 592d108x_004r2_20h 40 14 0.20 0.94 1500 x 592d158x_004x2_20h 60 20 0.04 2.10 2200 x 592d228x_004x2_25h 88 25 0.04 2.30 2200 x 592d228x_004x2_20h 88 25 0.055 2.30 6.3 wvdc at + 85 c, surge = 8 v . . . 4 wvdc at + 125 c, surge = 5 v 6.8 a 592d685x_6r3a2_15h 0.56 5 5.50 0.10 10 a 592d106x_6r3a2_15h 0.48 5 2.70 0.15 15 a 592d156x_6r3a2_15h 0.9 6 2.50 0.15 15 b 592d156x_6r3b2_15h 0.9 6 1.70 0.22 22 b 592d226x_6r3b2_15h 1.4 6 1.50 0.23 22 a 592d226x_6r3a2_10h 1.4 12 4.00 0.39 22 a 592d226x_6r3a2_13h 1.4 6 1.50 0.20 22 b 592d226x_6r3b2_15h 1.4 6 1.50 0.20 33 a 592d336x_6r3a2_15h 2.1 6 1.70 0.32 33 b 592d336x_6r3b2_15h 2.1 6 1.40 0.24 33 c 592d336x_6r3c2_15h 2.1 6 0.40 0.50 33 s 592d336x_6r3s2_12h 2.1 10 2.00 0.17 33 s 592d336x_6r3s2_13h 2.1 8 1.30 0.24 47 a 592d476x_6r3a2_13h 2.7 14 2.00 0.17 47 a 592d476x_6r3a2_15h 2.7 14 2.00 0.17 47 b 592d476x_6r3b2_15h 3.0 8 1.40 0.24
592d vishay sprague solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40004 92 revision: 20-nov-08 note: * preliminary values contact factory for availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?. standard/extended ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 6.3 wvdc at + 85 c, surge = 8 v . . . 4 wvdc at + 125 c, surge = 5 v 47 b 592d476x_6r3b2_12h 3.0 8 1.40 0.24 47 c 592d476x_6r3c2_15h 3.0 6 0.40 0.50 47 d 592d476x_6r3d2_15h 3.0 6 0.30 0.65 68 b 592d686x_6r3b2_20h 4.3 6 0.50 0.40 68 b 592d686x_6r3b2_13h 4.3 8 0.60 0.36 68 c 592d686x_6r3c2_14h 3.87 6 0.38 0.46 68 c 592d686x_6r3c2_15h 4.3 6 0.38 0.51 68 d 592d686x_6r3d2_15h 4.3 6 0.27 0.68 68 r 592d686x_6r3r2_15h 4.3 6 0.20 0.87 100 b 592d107x_6r3b2_15h 4.3 6 1.00 0.28 100 b 592d107x_6r3b2_20h 6.3 8 0.45 0.42 100 c 592d107x_6r3c2_15h 6.3 8 0.38 0.51 100 c 592d107x_6w3c2_15h 6.3 8 0.38 0.51 100 d 592d107x_6r3d2_15h 6.3 8 0.26 0.69 100 r 592d107x_6r3r2_15h 6.3 8 0.20 0.87 100 r 592d107x_6w3r2_15h 6.3 8 0.20 0.87 120 c 592d127x_6r3c2_20h 6.50 8 0.20 0.74 150 c 592d157x_6r3c2_20h 9.5 8 0.19 0.76 150 d 592d157x_6r3d2_15h 9.5 8 0.25 0.71 150 r 592d157x_6w3r2_15h 9.5 8 0.20 0.87 150 r 592d157x_6r3r2_15h 9.5 8 0.20 0.87 220 c 592d227x_6r3c2_18h 13.9 8 0.15 0.86 220 c 592d227x_6r3c2_20h 13.9 8 0.15 0.86 220 c 592d227x_6w3c2_20h 13.9 8 0.15 0.86 220 d 592d227x_6r3d2_15h 13.9 8 0.22 0.75 220 d 592d227x_6r3d2_20h 13.9 8 0.12 1.08 220 r 592d227x_6r3r2_15h 13.9 8 0.18 0.91 330 c 592d337x_6r3c2_20h 20.8 8 0.10 1.05 330 d 592d337x_6r3d2_16h 20.8 8 0.12 1.02 330 d 592d337x_6r3d2_20h 20.8 8 0.10 1.18 330 d 592d337x_6w3d2_20h 20.8 8 0.10 1.18 330 d 592d337x_6r3d2_19h 20.8 8 0.10 1.18 330 r 592d337x_6r3r2_15h 20.8 8 0.18 0.91 330 r 592d337x_6r3r2_20h 20.8 8 0.10 1.32 470 c 592d477x_6r3c2_20h 29.6 14 0.10 1.05 470 c 592d477x_6r3c2_16h 29.6 14 0.20 0.71 470 d 592d477x_6r3d2_20h 29.6 10 0.10 1.18 470 r 592d477x_6r3r2_20h 29.6 10 0.10 1.32 470 r 592d477x_6w3r2_20h 29.6 10 0.10 1.32 470 r 592d477x_6r3r2_16h 29.6 10 0.12 1.32 680 r 592d687x_6r3r2_20h 42.8 10 0.10 1.87 680 r 592d687x_6r3r2_16h 42.8 10 0.10 1.87 1000 r 592d108x_6r3r2_20h 63 20 0.20 0.94 1000 x 592d108x_6r3x2_20h 63 16 0.04 2.10 1000 x 592d108x_6r3x2_18h 63 16 0.04 2.10 1500 r 592d158x06r3r2_20h 95 33 0.12 1.21 1500 x 592d158x_6r3x2_16h 95 25 0.045 1.97 1500 x 592d158x_6r3x2_25h 95 20 0.035 2.30 1500 x 592d158x_6w3x2_25h 95 20 0.035 2.30 1500 x 592d158x_6r3x2_20h 95 25 0.045 1.97 2200 x 592d228x_6r3x2_20h 139 35 0.055 1.80 2200 x 592d228x_6r3x2_21h 139 35 0.055 1.80 2200 x 592d228x_6r3x2_22h 139 35 0.055 1.80
document number: 40004 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 20-nov-08 93 592d solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv vishay sprague note: * preliminary values contact factory fo r availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?. standard/extended ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 10 wvdc at + 85 c, surge = 13 v . . . 7 wvdc at + 125 c, surge = 8 v 10 a 592d106x_010a2_15h 1.0 6 2.60 0.15 10 b 592d106x_010b2_15h 1.0 6 1.70 0.22 22 a 592d226x_010a2_13h 2.2 6 1.50 0.20 22 b 592d226x_010b2_15h 2.2 6 1.50 0.23 22 b 592d226x_010b2_13h 2.2 6 1.50 0.23 22 c 592d226x_010c2_15h 2.2 6 0.40 0.50 33 c 592d336x_010c2_15h 3.3 6 0.40 0.50 33 d 592d336x_010d2_15h 3.3 6 0.30 0.65 33* b* 592d336x_010b2_20h* 3.3* 6* 0.50* 0.40* 47 b 592d476x_010b2_20h 4.7 6 0.50 0.68 47 d 592d476x_010d2_15h 4.7 6 0.27 0.87 47 r 592d476x_010r2_15h 4.7 6 0.20 0.40 68 b 592d686x_010b2_20h 6.8 6 0.45 0.84 68 c 592d686x_010c2_15h 6.8 6 0.24 0.68 68* c* 592d686x_010c2_20h* 6.8* 6* 0.25* 0.66* 68 d 592d686x_010d2_15h 6.8 6 0.27 0.87 68 r 592d686x_010r2_15h 6.8 6 0.20 0.42 100 b 592d107x_010b2t20h 10 14 0.40 0.45 100 c 592d107x_010c2_20h 10 8 0.19 1.11 100 d 592d107x_010d2_15h 10 8 0.10 0.76 100 r 592d107x_010r2_15h 10 6 0.22 0.83 150 c 592d157x_010c2_15h 15 8 0.17 0.80 150 c 592d157x_010c2_20h 15 8 0.17 0.80 150 d 592d157x_010d2_15h 15 8 0.25 0.71 150 d 592d157x_010d2_20h 15 8 0.14 1.00 220 d 592d227x_010d2_20h 22 8 0.12 1.08 220 d 592d227x_010d2_19h 22 8 0.12 1.08 220 r 592d227x_010r2_20h 22 8 0.10 1.32 330 d 592d337x_010d2_18h 33 8 0.10 1.12 330 d 592d337x_010d2_20h 33 8 0.10 1.18 330 r 592d337x_010r2_20h 33 8 0.10 1.32 16 wvdc at + 85 c, surge = 20 v . . . 10 wvdc at + 125 c, surge = 12 v 4.7 a 592d475x_016a2_15h 0.8 6 3.50 0.13 6.8 a 592d685x_016a2_15h 1.1 6 3.30 0.13 6.8 b 592d685x_016b2_15h 1.1 6 1.80 0.21 10 b 592d106x_016b2_15h 1.6 6 1.60 0.22 10 c 592d106x_016c2_15h 1.6 6 1.00 0.32 15 b 592d156x_016b2_15h 2.4 6 1.40 0.24 15 d 592d156x_016d2_15h 2.4 6 0.50 0.50 22 b 592d226x_016b2_20h 3.5 6 0.60 0.36 22 c 592d226x_016c2_15h 3.5 6 0.30 0.46 22 d 592d226x_016d2_15h 3.5 6 0.40 0.60 33 b 592d336x_016b2_20h 5.3 6 0.60 0.36 33 c 592d336x_016c2_15h 5.3 6 0.25 0.66 33 d 592d336x_016d2_15h 5.3 6 0.30 0.62 33 r 592d336x_016r2_15h 5.3 6 0.27 0.75 47 b 592d476x_016b2_20h 7.5 6 0.72 0.33 47 c 592d476x_016c2_16h 7.5 6 0.25 0.66 47 c 592d476x_016c2_20h 7.5 6 0.25 0.66 47 r 592d476x_016r2_15h 7.5 6 0.25 0.77 68 c 592d686x_016c2_15h 10.9 6 0.50 1.20 68 c 592d686x_016c2_20h 10.9 6 0.25 0.66
592d vishay sprague solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40004 94 revision: 20-nov-08 note: * preliminary values contact factory for availability. for 10 % tolerance, specify ?9?; for 20 % tolerance, change to ?0?. standard/extended ratings capacitance (f) case code part number max. dcl at + 25 c (a) max. df at + 25 c 120 hz (%) max. esr at + 25 c 100 khz ( ) max. ripple 100 khz irms (a) 16 wvdc at + 85 c, surge = 20 v . . . 10 wvdc at + 125 c, surge = 12 v 68 d 592d686x_016d2_20h 10.9 6 0.17 0.91 100 c 592d107x_016c2_20h 16 8 0.15 0.85 100 d 592d107x_016d2_15h 16 8 0.15 0.97 100 c 592d107x_016c2_20h 16 8 0.15 0.97 100 d 592d107x_016d2_20h 16 8 0.15 0.97 150 d 592d157x_016d2_20h 24 8 0.10 1.18 150 r 592d157x_016r2_20h 24 8 0.10 1.32 220 r 592d227x_016r2_20h 35.2 9 0.12 1.30 20 wvdc at + 85 c, surge = 26 v . . . 13 wvdc at + 125 c, surge = 16 v 4.7 a 592d475x_020a2_15h 0.9 6 3.80 0.13 4.7 b 592d475x_020b2_15h 0.9 6 3.20 0.16 6.8 b 592d685x_020b2_15h 1.4 6 3.10 0.16 6.8 c 592d685x_020c2_15h 1.4 6 1.10 0.30 10 b 592d106x_020b2_15h 2.0 6 3.00 0.16 10 d 592d106x_020d2_15h 2.0 6 0.50 0.48 15 c 592d156x_020c2_15h 3.0 6 0.60 0.42 15 r 592d156x_020r2_15h 3.0 6 0.40 0.65 22 b 592d226x_020b2_20h 4.4 6 0.60 0.37 22* c* 592d226x_020c2_20h* 4.4* 6* 0.30* 0.61* 22 d 592d226x_020d2_15h 4.4 6 0.40 0.56 22 r 592d226x_020r2_15h 4.4 6 0.28 0.73 33* d* 592d336x_020d2_20h* 6.6* 6* 0.26* 0.73* 33 r 592d336x_020r2_15h 6.6 6 0.28 0.73 25 wvdc at + 85 c, surge = 33 v . . . 17 wvdc at + 125 c, surge = 20 v 2.2 a 592d225x_025a2_15h 0.6 6 8.00 0.09 2.2 b 592d225x_025b2_15h 0.6 6 6.00 0.12 3.3 b 592d335x_025b2_15h 0.8 6 5.60 0.12 3.3 c 592d335x_025c2_15h 0.8 6 2.00 0.22 4.7 c 592d475x_025c2_15h 1.2 6 1.60 0.25 6.8 c 592d685x_025c2_15h 1.7 6 1.30 0.26 6.8 d 592d685x_025d2_15h 1.7 6 1.30 0.31 10 b 592d106x_025b2_15h 2.5 6 2.00 0.29 10 d 592d106x_025d2_15h 2.5 6 1.20 0.32 10 r 592d106x_025r2_15h 2.5 6 0.48 0.56 15 r 592d156x_025r2_15h 3.8 6 0.40 0.61 15* c* 592d156x_025c2_20h* 3.8* 6* 0.40* 0.52* 22* c* 592d226x_025c2_20h* 5.5* 6* 0.30* 0.68* 22* d* 592d226x_025d2_20h* 5.5* 6* 0.30* 0.68* 68 r 592d686x_025r2_20h 17 8 0.23 0.812 35 wvdc at + 85 c, surge = 46 v . . . 23 wvdc at + 125 c, surge = 28 v 1.0 a 592d105x_035a2_15h 0.5 4 10.0 0.08 1.0 b 592d105x_035b2_15h 0.5 4 6.50 0.11 1.5 b 592d155x_035b2_15h 0.5 4 4.2 0.14 2.2* b* 592d225x_035b2_15h* 0.8* 6* 6.00* 0.12* 2.2 c 592d225x_035c2_15h 0.8 6 3.50 0.17 3.3 c 592d335x_035c2_15h 1.2 6 3.20 0.18 3.3 d 592d335x_035d2_15h 1.2 6 2.10 0.24 4.7 b 592d475x_035b2_15h 1.6 6 1.60 0.23 4.7 c 592d475x_035c2_15h 1.6 6 2.60 0.20 4.7 c 592d475x_035c2_15h 1.6 6 2.80 0.18 4.7 d 592d475x_035d2_15h 1.6 6 1.80 0.24 4.7 r 592d475x_035r2_15h 1.6 6 1.30 0.34 6.8 d 592d685x_035d2_15h 2.4 6 1.30 0.31 6.8 r 592d685x_035r2_15h 2.4 6 1.20 0.35 10 r 592d106x_035r2_15h 3.5 6 1.20 0.35 50 wvdc at + 85 c, surge = 65 v . . . 33 wvdc at + 125 c, surge = 38 v 10 r 592d106x_050r2_20h 5.0 6 0.70 0.50
document number: 40004 for technical questions, contact: tantalum@vishay.com www.vishay.com revision: 20-nov-08 95 592d solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv vishay sprague case code/part number x-ref old new a2_ a2_15h b2_ b2_15h c2_ c2_15h d2_ d2_15h r2_ r2_15h s2_ s2_13h t2_ b2_20h u2_ c2_20h v2_ d2_20h w2_ r2_20h x2_ x2_20h y2_ x2_25h typical curves of esr - as a function of frequency ?a? case 1000 100 10 1 0.1 impedance esr 1 f, 35 v 15 f, 6.3 v frequency (khz) 0.1 1 10 100 1000 ?b? case 1000 100 10 1 0.1 impedance esr frequency (khz) 0.1 1 10 100 1000 10 f, 10 v 4.7 f, 20 v ?c? case 1000 100 10 1 0.1 impedance esr frequency (khz) 0.1 1 10 100 1000 4.7 f, 25 v 33 f, 6.3 v ?d? case 100 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 1000 47 f, 6.3 v 6.8 f, 25 v
592d vishay sprague solid tantalum chip capacitors t antamount ? , low profile, conformal coated, maximum cv www.vishay.com for technical questi ons, contact: tantalum@vishay.com document number: 40004 96 revision: 20-nov-08 typical curves at + 25 c, im pedance and esr vs. frequency ?r? case 100 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 1000 10 f, 25 v 100 f, 6.3 v ?s? case 100 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 1000 33 - 6.3 v 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 10 000 592d 1500-4 v x/20h case esr/impedance vs frequency 1000 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 10 000 592d 1500-6.4 v x/25h case esr/impedance vs frequency 1000 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 10 000 592d 1000-6.3 v x/20h case esr/impedance vs frequency 1000 10 1 0.1 0.01 impedance esr frequency (khz) 0.1 1 10 100 10 000 592d 2200-4 v x/25h case esr/impedance vs frequency 1000
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
